Your Cart
Search used machines
Decoiler Iron SA-400
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | SA-400 |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Used Iron SA-400 decoiler
SA-400 model coil decoiler, used to hold and unwind coils of sheet or strip and feed a press or a line. In the photo it has a yellow-armed mandrel, a gearmotor and an illegible CE plate.
Configuration of this unit
- Make: Iron (according to our data sheet; brand marking to be confirmed)
- Model: SA-400 (according to our data sheet and title)
- Radial-arm mandrel with adjusting screws and gearmotor visible in the photo
- CE plate on the frame, not legible
- No coil loaded in the photo
- Coil capacity, diameters, power and year: not recorded
Typical applications
Feeding presses and cutting lines with sheet or strip coil, within the capacity confirmed on the plate.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What is the SA-400 decoiler used for?
It holds a coil and unwinds it in a controlled way to feed a press or a roll forming line. This unit has a radial-arm mandrel and a gearmotor. Maximum weight and coil diameters are not recorded on the data sheet and will be confirmed on the unit.
What coil capacity does it take?
It is not recorded on our data sheet and cannot be read in the photos. Capacity figures depend on the plate and on each unit, so we do not assume them. They will be confirmed in Monforte del Cid before you make any decision.
Can I see the decoiler before buying it?
Yes. It is at our premises in Monforte del Cid (Alicante). You can visit it or ask us for a video. Our own service engineers take care of transport and commissioning.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Decoiler Iron SA-400 · Ref. 059309
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.