Your Cart
Search used machines
BOTTARINI
Compressor Bottarini KDV30
- Year
- 2007
- Control
- Display with start and stop keys
- Power
- 30
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | KDV 30-7.5 EANA |
|---|---|
| Year | 2007 |
| Model (plate) | KDV 30-7.5 EANA |
| Control | Display with start and stop keys |
Headstock and spindle
| Power | 30 |
|---|
Other data
| Litres / minute | 6.04 m3 / min |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Bottarini KDV 30 screw compressor
The Bottarini KDV 30-7.5 EANA is an air compressor from the Italian firm Bottarini (Lonate Pozzolo, Varese). It produces compressed air for the pneumatic tools and machines of a workshop or industrial premises.
What the documentation says
Bottarini's catalogue groups the KDV 25, 30 and 40 models, with a voltage of 400 V at 50 Hz according to the manufacturer. The power, pressure and year values on our unit's plate cannot be read clearly in the photos, so we do not publish them; contact us to confirm them on the machine.
Configuration of this unit
- Make and model: Bottarini KDV 30-7.5 EANA (plate)
- Control display with start and stop keys, and service and safety shutdown warnings
- KDV30 logo on the enclosure
Typical applications
Compressed air supply in machine shops, metal fabrication, industry and maintenance.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What air flow and pressure does the Bottarini KDV 30 compressor deliver?
The values on our unit's plate cannot be read properly in the photos, so we do not publish air flow, pressure or power here. According to the manufacturer, the KDV series groups the 25, 30 and 40 models, and air flow depends on the working pressure. Contact us and we will check them on the machine.
What is a screw compressor?
It is an air compressor that compresses air with two screws rotating against each other, without pistons. It is used where compressed air is needed continuously, as in workshops and industry. It is an alternative to piston compressors, with steadier operation in continuous duty.
What does the KDV 30 plate show?
The plate shows the manufacturer, Bottarini, and the model, KDV 30-7.5 EANA. The other values, such as power, pressure and year, cannot be read properly in the photos, so we do not state them. We recommend confirming them with Ferrotall before sizing the electrical or compressed air installation.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Compressor Bottarini KDV30 · Ref. 014422
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.