Your Cart
Search used machines
Compressor
- Control
- Pressure switch and pressure gauge
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Pressure control | Pressure switch and pressure gauge |
|---|
Other data
| Air receiver | Yes |
|---|---|
| Transmission | V-belts |
| Air receiver | Yes (horizontal tank) |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Piston compressor with air receiver
Piston air compressor with a finned head, V-belt drive and electric motor, mounted on a horizontal tank. In the photos it is painted blue and sits on a pallet.
Key strengths of this type of equipment
A piston compressor with an air receiver is simple equipment and easy to maintain. It has a pressure switch that starts and stops it according to tank pressure, and a pressure gauge to monitor it.
Configuration of this unit
- Piston compressor with finned cylinder and belt flywheel
- Electric motor with belt drive
- Horizontal tank with pressure gauge and pressure switch
- Motor starter mounted on the tank
Typical applications
Compressed air supply for pneumatic tools, blow guns and small equipment in workshops.
See it at Ferrotall
The compressor is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
Does it have an air tank?
Yes. The photos show the compressor mounted on a horizontal air receiver painted blue, with a pressure gauge and pressure switch. Capacity and maximum pressure are not recorded; we confirm them by reading the plate on the machine, and we can send you additional photos or a video.
How is the compressor driven?
By an electric motor that drives the head through V-belts and a large-diameter pulley, as seen in the photos. This is a common drive on workshop piston compressors and is simple to maintain. Motor power is not recorded; we confirm it on the machine.
What power and air flow does it have?
They are not recorded in our data sheet and cannot be read in the photos. To size an installation we need the plate data of the motor and the compressor; contact us and we will check them on the machine, or tell us the air consumption of your tools and we will advise you.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Compressor · Ref. 027012
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.