Your Cart
Search used machines
DOOSAN
CNC lathe Doosan Puma 500
- Year
- 2006
- Control
- Fanuc Series 21i-TB
- Swing over bed
- NO GAP BRIDGE
- Distance between centres
- 1575
- Tools
- Yes, visible
- Power
- 37/45
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | PUMA500 |
|---|---|
| Year | 2006 |
| Control | Fanuc Series 21i-TB |
Headstock and spindle
| Spindle bore | 152 |
|---|---|
| Main motor power | 37/45 |
Turning
| Distance between centres | 1575 |
|---|---|
| Swing in gap | NO GAP BRIDGE |
| Swing over cross slide | 630 |
| Swing over bed | 900 |
| Tool turret | Yes, visible |
Dimensions, weight and connection
| Overall dimensions | 4800 x 2500 x 2700 |
|---|---|
| Weight | 14000 |
Other data
| Bed width | 500 |
|---|---|
| Swarf conveyor | Yes |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Used Doosan Puma 500 CNC lathe
The Doosan Puma 500 is a high-capacity CNC lathe: 1,575 mm between centres, 900 mm swing over bed and a 152 mm spindle bore, so it takes long parts and large-diameter bar or tube.
Key strengths
The Doosan (formerly Daewoo) Puma series is built for heavy turning, with a heavy-section bed and a high-power main motor, rated at 37/45 kW on this unit. The control is a Fanuc Series 21i-TB, as shown on the console fascia.
Configuration of this unit
- Model: Puma 500
- Control: Fanuc Series 21i-TB (fascia)
- Distance between centres: 1,575 mm
- Spindle bore: 152 mm
- Swing over cross slide: 630 mm; over bed: 900 mm
- Bed width: 500 mm; no gap bridge
- Main motor power: 37/45 kW
- Tool turret and swarf conveyor (photos)
- Year: 2006
- Overall dimensions: 4,800 x 2,500 x 2,700 mm; weight: 14,000 kg
Typical applications
Long, heavy turned parts: shafts, rollers, hydraulic cylinders, tubes, flanges and components for the energy, oil and heavy machinery sectors.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What control does the Doosan Puma 500 have?
The console fascia on this unit reads Fanuc Series 21i-TB. This is a Fanuc lathe control with ISO programming and canned cycles, widely known to programmers and service engineers, which makes maintenance and training easier.
What parts can it machine?
With 1,575 mm between centres, 900 mm swing over bed and a 152 mm spindle bore, it takes long, large-diameter parts such as shafts, tubes or cylinders. The maximum workpiece weight is not recorded in the data sheet and should be confirmed with us.
What does it mean that the lathe has no gap bridge?
Some lathes have a gap section in the bed, closed by a removable bridge, to accept a larger diameter close to the chuck. According to our data sheet, this unit does not have one, so bear this in mind when planning large-diameter parts. To find out whether a particular part fits on this unit, send us the drawing and we will confirm it.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
New machinery from the brands we represent
Would you prefer an equivalent new machine?
If we don't have it, we'll find it
CNC lathe Doosan Puma 500 · Ref. 029469
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.