Your Cart
Search used machines
DAEWOO
CNC lathe Daewoo Puma 240MC
- Year
- 2007
- Control
- FANUC 0iTC
- Swing over bed
- 390
- Distance between centres
- 503
- Tools
- Yes
- Power
- 18.5
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | 240M |
|---|---|
| Type | Slant bed |
| Control | FANUC 0iTC |
| Year | 2007 |
| Brand | Doosan (Daewoo) |
Travels and table
| Y axis | No |
|---|
Headstock and spindle
| Sub-spindle | No |
|---|---|
| Main motor power | 18.5 |
Turning
| Distance between centres | 503 |
|---|---|
| Bar capacity | 65 |
| Swing over cross slide | 390 |
| Live-tool turret | Yes |
Other data
| Max. turning diameter | 300 |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Doosan Daewoo Puma 240M slant-bed CNC lathe
The Puma 240M is a slant-bed CNC lathe from Daewoo (now Doosan), with live tooling in the turret, suited to batches of turned and milled parts in a single set-up, such as shafts, flanges and bushes. It takes a turning diameter of 300 mm and has a bar capacity of 65 mm.
Key strengths
According to listings for other units of this model, the Puma 240M series is offered with a 12-station turret, live tooling of up to 5,000 rpm and a spindle speed of 4,500 rpm; these figures are not confirmed for this unit. The Fanuc 0i-TC control given in our data sheet is a widely known control, with ISO code programming and canned turning cycles.
Configuration of this unit
- Model: Puma 240M (marked on the door; our data sheet states 240MC)
- Type: slant bed
- Control: Fanuc 0i-TC (according to data sheet)
- Distance between centres: 503 mm
- Bar capacity: 65 mm
- Swing over cross slide: 390 mm
- Max. turning diameter: 300 mm
- Live-tool turret: yes
- Y axis: no · Sub-spindle: no
- Main motor power: 18.5 kW
- Year: 2007
Typical applications
Turning and milling of turned parts in a single set-up, production of shafts, flanges, fittings and bar-fed parts up to 65 mm in diameter.
See it at Ferrotall
The lathe is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What size of part does this lathe take?
According to our data sheet, the maximum turning diameter is 300 mm, the swing over the cross slide 390 mm, the distance between centres 503 mm and the bar capacity 65 mm. It is suitable for medium-sized parts and for bar work. To check a specific part, send us your drawing.
What does live-tool turret mean?
It is a turret fitted with motor-driven rotating tools, such as end mills or drills, that allow milling and drilling without removing the part from the lathe. According to our data sheet, this unit has a live-tool turret. According to listings for other units in the series, the turret has 12 stations.
Which control does the Puma 240M have?
Our data sheet states Fanuc 0i-TC. It is programmed in ISO code with canned turning cycles and has a screen and alphanumeric keyboard. Our service engineers can advise you on the programming capabilities and control options of this unit.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
New machinery from the brands we represent
Would you prefer an equivalent new machine?
If we don't have it, we'll find it
CNC lathe Daewoo Puma 240MC · Ref. 040560
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.