Your Cart
Search used machines
TEJERO
CNC bending machine Tejero H-35
- Year
- Not available
- Power
- 4.13
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | H-35 NC |
|---|---|
| Year | Not available |
Headstock and spindle
| Main motor power | 4.13 |
|---|
Dimensions, weight and connection
| Overall dimensions | 3200x1070x715 |
|---|
Other data
| Drive | CNC |
|---|---|
| Bending capacity | D-35 x 1.5 (R-40) |
| Min. bending radius | 20 mm |
| Max. bending radius | 160 mm |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Used Tejero H-35 CNC tube bender
CNC-driven tube bender from the Spanish manufacturer Tejero, with a bending capacity of 35 mm diameter by 1.5 mm wall thickness (R-40). It is used to produce bent tube parts in series.
What this tube bender offers
According to the data sheet, this unit bends with radii from 20 to 160 mm. The photo shows two bending heads and control pendants.
Configuration of this unit
- Model: H-35 NC; CNC drive
- Bending capacity: Ø 35 x 1.5 mm (R-40)
- Minimum bending radius: 20 mm; maximum: 160 mm
- Overall dimensions: 3,200 x 1,070 x 715 mm
- Two bending heads and two control pendants visible
Typical applications
Tube for metal furniture, light structures, exhausts, handrails, frames and pipework.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What tube diameter does the Tejero H-35 CNC bend?
According to the data sheet for this unit, the capacity is 35 mm diameter by 1.5 mm wall thickness, with bending radii between 20 mm and 160 mm. It is a bender for thin-walled tube, such as that used in furniture and light structures.
Is it a CNC tube bender?
Yes, the drive stated on the data sheet is CNC. The make and model of the control on this unit are not recorded, so they will be confirmed during the visit. Numerical control makes it possible to repeat bending angles and sequences from one batch to the next.
What is the difference between bending and forming a tube?
In the trade the two terms are used interchangeably: both describe bending a tube without flattening it. A bender with an internal mandrel and tooling for the right radius avoids wrinkling and ovality, which is key with thin-walled tube such as the 1.5 mm of this unit.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
CNC bending machine Tejero H-35 · Ref. 596-594
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.