Your Cart
Search used machines
IEMCA
Bar feeder IEMCA
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
Other data
| Electrical cabinet | With push buttons and emergency stop |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Iemca bar feeder
Iemca bar feeder: an auxiliary unit fitted to a CNC lathe to feed bar stock into the spindle; it is not a lathe. The photos show the feeder body on its frame, with electrical cabinet, tank and motor.
Configuration of this unit
- Make: Iemca (lettering on the feeder body)
- Electrical cabinet with push buttons and emergency stop
- Tank with motor
- Frame with support base
- Trolley of trays with hand-written ranges (25-30, 30-40 and others); whether it belongs to this feeder will be confirmed during a visit
Typical applications
Bar feeding on CNC lathes, for producing batches of turned parts from bar stock.
See it at Ferrotall
The unit is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What does a bar feeder do on a CNC lathe?
An automatic bar feeder loads the bar into the lathe spindle and pushes it forward after each finished part, so batches can be run without the operator reloading material for every part. The bar is guided through channels matched to the working diameter.
Which Iemca model is this unit?
Only the Iemca brand name can be read in the photos; neither the exact model nor a rating plate is visible. We will confirm it at our premises and, if you need it, check compatibility with your lathe together with you.
What bar diameters does it take?
The trays on the trolley in the photo are hand-labelled with ranges such as 25-30 or 30-40, but we do not know whether they belong to this feeder and they are not data from the data sheet. We confirm the bar diameters it accepts when we inspect the unit, together with the guide channels available.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Bar feeder IEMCA · Ref. 057776
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.