Your Cart
Search used machines
FAT
Bandsaw FAT SA-350
- Control
- Panel with 4-7 bar pressure gauge and mushroom-head emergency stop
- Table
- Curved mitre scale
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | SA 350 |
|---|---|
| Control | Panel with 4-7 bar pressure gauge and mushroom-head emergency stop |
Travels and table
| Table | Curved mitre scale |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
FAT SA-350 pivoting-bow bandsaw
Bandsaw with pivoting bow and vice, for straight and mitre cutting of bar, tube and sections. Our data sheet gives the model as SA 350, and «MOD 350» is embossed on the bow.
The table has a curved mitre scale and the vice is mounted on the base. The cabinet carries a control panel with main switch, selectors, push buttons, mushroom-head emergency stop and a pressure gauge marked 4 to 7 bar.
Configuration of this unit
- Model: SA 350 (data sheet); «MOD 350» on the bow.
- Pivoting bow with vice and mitre scale.
- Motor on the upper right-hand side of the bow.
- Control panel with main switch, push buttons and mushroom-head emergency stop.
- Pressure gauge marked «4÷7 bar».
- Base cabinet with side door.
Typical applications
Cutting of sections, tube and bar in metal fabrication shops, machine shops and stockholders, including mitre cuts.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
Does it cut mitres?
The photos show a curved scale on the table and the bow mounted on a pivot, which indicates that it can be swung for angled cuts. The exact maximum angles are not given in our data sheet; we will confirm them during a visit or by video.
What controls does it have?
The cabinet panel has a main switch, selectors, push buttons, a mushroom-head emergency stop and a pressure gauge marked 4 to 7 bar. The motor is mounted on the upper part of the bow. If you need to see the controls in detail, we can send you photos or a video.
How is the purchase arranged?
The saw is in Monforte del Cid (Alicante) and can be viewed by appointment. Our own service engineers handle transport, installation and commissioning at your workshop, including connection to the electrical supply and, where applicable, to compressed air.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Bandsaw FAT SA-350 · Ref. 016629
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.